Windows 10 Won’t Stay Asleep
Sleep mode is the basic part of the Windows system. Most of you don’t turn the PC off every time, but put it to sleep mode to reduce power consumption and cool it down while maintaining the speedy access to the system.
However, the sleep mode in Windows 10 seems to be problematic. In other words, even if you can make your PC sleep, the PC will wake up without any interaction. Basically, it’s doesn’t stay in sleep mode as expected before using it.
We will provide some basic troubleshooting steps for you. If your computer won’t stay asleep, you can try the solutions listed below.
7 Solutions to Fix Computer Won’t Stay Asleep
Now, we will introduce 7 solutuions to fix computer won’t stay asleep one by one.
Solution 1: Run the Troubleshooter
First, you should make sure that you have enabled sleep mode correctly. Then you should confirm that the sleep mode is indeed properly configured. You can follow the steps we provided below to confirm that.
Step 3: Under the Put the computer to sleep section, you should set the time for PC to make it go to sleep.
Secondly, you can use the Windows built-in tool — Troubleshooter related to power to fix that computer wakes from sleep. All errors in the power configuration can be fixed by troubleshooter and it allows you to put your PC to sleep without having to wake up by yourself. You can run Troubleshooter by the following steps:
Step 2: In the setting page, please choose Update & Security.
Step 3: Open Troubleshoot from the left panel.
Solution 2: Check the Drivers
According to users, Realtek sound drivers can cause the system wake-up for no reason. Thus, you should check if all drivers are installed properly. Here are the steps.
Step 1: You should navigate to Device Manager and update all major drivers.
Alternatively, you can go to the official manufacturer’s website and download the appropriate drivers, even if the driver seems to be up-to-date. This is especially true for older devices that are known to have Windows 10 issues. So, if your computer won’t stay in the Sleep mode on Windows 10, you can try it.
Solution 3: Check the Advanced Power Options
You can reset all advanced power options to their default values. This will solve some problems, for example, computer configures the wrong advanced options for your active power plan. After this step, don’t forget to set the sleep mode preferences.
Here are the steps of resetting advanced power options to their default values.
Step 2: Click Change plan settings on your active power plan.
Solution 4: Disable Specific Devices from Waking Up Your PC
There is a solution for you to find out which device is waking up your device. Then you can adjust its settings or even unplug it. Some third-party applications can help, but we will use Command Prompt. You can access peripherals and determine all power usage on your system by these commands.
The following are the steps:
Step 4: At last, you need to close Command Prompt and restart your PC.
Solution 5: Use Sleep-Hibernation Hybrid Instead of Sleep
To fix the issue of computer won’t stay asleep, you can use Sleep-Hibernation. You can follow the steps:
Step 2: Click Change plan settings on your active power plan.
Step 4: Turn Hybrid sleep on for both Battery and AC and click OK to confirm the changes.
Solution 6: Disable Fast Startup and Prevent Programs Starting with the System
In addition, we recommend you to disable the Fast Startup feature. As we all know, this newly introduced (relatively newer) feature can cause that the system can’t wake up occasionally without any reason. Here are steps to disable the Fast Startup feature.
Step 4: Shut down your PC and power it on again to confirm whether your computer won’t stay asleep.
In addition, we suggest that all startup third-party programs and their dedicated services should be disabled. This is known as Clean Boot. You can follow the instructions to disable the Clean Boot.
Step 4: At last, restart your PC.
If you are unable to disable your antivirus software, we recommend that you uninstall it temporarily. You can install it again after determining which application is causing the computer wakeup.
Solution 7: Reset Your PC to Factory Values
Finally, if none of the above solutions can fix that Windows 10 won’t stay asleep, there is only one solution left. Whether it is good or bad, reset the PC to the factory value. This is more like a refresh of the system than reinstalling. Moreover, since most reports problems after the update, you should use this recovery option to resolve this issue.
Step 3: Choose Keep my files and continue with the resetting process.
Use MiniTool ShadowMaker to Back Up Your System
After offering you the solutions to fix Windows 10 won’t stay asleep, we have a suggestion for you. In case of something on your system, we suggest you backing up your system in advance. Now, we will introduce a free backup software for you — MiniTool ShadowMaker.
MiniTool ShadowMaker provides a one-click system backup solution. It supports backing up your system drive completely, including system partition, system reserved partition and EFI system partition. And you can image all of your data including computer settings, applications, drivers, system files and boot files.
The system backup is bootable. When the system crashes, you can restore your computer to a normal state, read this post — How to Restore Computer to Earlier Date in Windows 10/8/7 (2 Ways).
MiniTool ShadowMaker provides a Trial Edition that gives you 30-day free trial for all backup features. You can purchase its Pro Edition to use it permanently.
Now you can download MiniTool ShadowMaker Trial Edition to back up your system.
Now, let’s see how to back up your Windows system.
Step 1: Decide a Backup Mode
- Launch MiniTool ShadowMaker and keep using the trial edition.
- Please choose the computer to manage and click Connect in the Local section to enter the main interface.
Step 2: Choose Backup Source
- Go to the Backup page.
- This software selects the system partition and system reserved partition by default.
Step 3: Choose a Destination Path to Store Your System.>
- You can back up your system to an external hard drive, USB flash drive, NAS and more.
- Then choose a destination path to store your system and click OK. Here we take the New Volume (E) as an example.
Step 4: Start to Back Up
- Go back to the following interface.
- You have two options: click Back up Now to start the backup process immediately or click Back up Later to delay the backup process.
Here are all the steps of how to back up system by MiniTool ShadowMaker.
Here are 7 solutions for you to fix that computer wakes from sleep. In addition, MiniTool ShadowMaker can help you back up system to protect your data. Share it on Twitter to let more people know.Click to tweet
Bottom Line
That’s all about how to fix computer won’t stay asleep. You can try these solutions one by one until you fix this issue successfully and you can try MiniTool ShadowMaker to back up your system in advance to protect your data. If you have any questions and suggestions, please contact us via [email protected] or leave a comment.
Originally published at https://www.minitool.com on August 20, 2019.
